Fireplace stove with heat exchanger 4051 OXIDE RED

W_Schéma zapojení výměníku se záložním zdrojem

W_Schéma zapojení výměníku s bezpečnostním ventilem DBV1

W_Schéma zapojení výměníku do bypassu s elektrokotlem

Prohlaseni_o_vlastnostech_4051_2018

energ_stitek_4051

Certifikát kamna 5,5 kW Ecodesign 2022PDF

Certifikat_5,5kW_ceska_norma

Certifikat_5,5kW_Rakouska_norma

Certifikat_5.5_kW_Nemecka_norma

Technický výkres_W_4051_2018_000..

Návod k obsluze ETG_5,5 kW_s_výměníkem_ver.2023

Description

Fireplace stove 4051 with a water heat exchanger. The heat exchanger does not require maintenance throughout its lifespan; exhaust gases do not pass through the heat exchanger, so it does not need cleaning. The water temperature in the exchanger does not affect combustion in the combustion chamber. Its quality of processing, design solution, and materials used differ from traditional Czech manufacturers. These stoves are characterized by environmentally friendly combustion and high efficiency, allowing customers to save up to 40% of fuel consumption. All our models are equipped with tertiary combustion and the option of supplying external air for combustion, making them suitable for installation in passive and low-energy houses. A highly desired feature is the minimal distance required from flammable objects. The combustion chamber and the water heat exchanger are made of 5mm thick steel sheet, with 8mm thick material used for the top lid. A single combined controller is used for power regulation and combustion mode control; when pulled out, it adjusts the power, and when rotated, it determines the combustion mode. The control knob is located at the bottom of the stove. Large cast iron doors are fitted with flat ROBAX glass measuring 433x348mm. The glass is cleaned during combustion with secondary air supply, keeping it clean for customers to fully enjoy the view of the flames and the comfort our product brings to their homes, accompanied by crackling wood.

Note for heating engineers: Before connecting to the water heating system, replace the plastic transport plugs with pressure fittings, a total of 5 pieces.

Additional information